7 Common Pool Problems in Texas and How to Fix Them Fast
Owning a pool in North DFW, TX is great almost all year round. The warm weather means more swimming months, but it also means more problems. Heat, storms, and dust in cities like Frisco, TX and Plano, TX can make pool maintenance tricky. While most states use their pools for only 4 or 5 months, Texas homeowners use them for nearly 10 months a year. That’s twice the wear and tear on equipment, tiles, and chemicals.
The combination of sunlight, humidity, and occasional freezing nights causes chemical imbalances and cracks. A survey from the Pool and Hot Tub Alliance found that over 70% of pool repairs in Texas happen between May and October.
If you live in Murphy, TX, Allen, TX, McKinney, TX, or The Colony, TX, you’ve probably seen how quickly green water or filter issues can appear. The good news is that most of these problems are easy to fix with proper maintenance. Here are the seven most common pool problems we see in North DFW and how you can fix them fast.
Problem #1: Green Pool Water
This is the number one issue for pool owners in Frisco and Plano. You wake up one morning and your clear blue pool looks like a swamp. The reason? Algae. It grows fast, especially when your chlorine levels drop or your filtration system isn’t running long enough.
Texas heat helps algae grow even faster. In warm weather above 85°F, algae can start spreading in just 24 hours. Once it gets a grip on your pool walls, it multiplies quickly and turns everything green.
To fix green water:
Brush the walls and steps to loosen the algae.
Shock the pool with chlorine (at least 10 times the normal level).
Run your pump 24 hours until the water clears.
Backwash or clean your filter afterward.
If your water still looks green after two days, it’s time to call in the pros. Hydra Pool Services provides green pool water treatment in North DFW, TX, especially for homes in Frisco and Murphy where pollen and dust can make algae worse.
Fun fact: According to the CDC, around 60% of home pool algae outbreaks are caused by unbalanced chlorine or pH levels. Regular testing makes a huge difference.
Problem #2: Cloudy or Murky Water
Another common complaint we hear from homeowners in Allen, TX and McKinney, TX is cloudy pool water. Sometimes it looks milky or dull instead of clear. This happens when the water chemistry is off or when tiny particles are floating in the water because the filter isn’t catching them.
Dust storms in North DFW make this worse. Fine dirt particles blow in and stay suspended in the water. High calcium levels and improper pH can also cause cloudy water.
To fix it:
Check pH and chlorine first. Ideal pH is 7.2 to 7.6.
Backwash or clean your filter.
Run your pump longer each day (8–12 hours).
Use a pool clarifier once a week during summer.
Hydra’s pool cleaning and filter cleaning services in Frisco and Plano, TX help clear cloudy water fast. About 45% of Texas pool owners report cloudy water at least once a season, so it’s one of the most common issues we handle.
If you can’t see the bottom of your pool clearly, don’t swim in it. Cloudy water hides hazards and may have bacteria buildup.
Problem #3: Pool Leaks (Small and Big)
Leaks are sneaky. You might not see them right away, but if your water level keeps dropping or you notice soggy spots near the deck, there’s probably a leak. Pool leaks in Plano, TX and Allen, TX are often caused by soil movement, cracked tiles, or bad plumbing joints.
You can do a simple test. Mark your water line with tape and check it after 24 hours. If the water drops more than 1/4 inch, you might have a leak.
Leaks waste a lot of water. Even a small hole can lose up to 10,000 gallons a month. That’s money down the drain and extra stress on your equipment.
Common signs of a pool leak:
Air bubbles in the pump
Constantly low water level
Cracks around tile or steps
Uneven deck or wet spots around the pool
Fixing leaks early is cheaper than replacing plaster later. Hydra offers pool leak detection and repair services across North DFW, TX, including Frisco, Plano, and The Colony. Our technicians use professional pressure testing and dye tests to find leaks quickly without draining your pool.
Problem #4: Low Water Pressure or Weak Circulation
Ever notice the jets in your pool aren’t pushing water like they used to? That’s low pressure or poor circulation, and it’s a problem we fix almost every week in Murphy, TX and Frisco, TX.
Poor circulation means your pool isn’t filtering properly, and that leads to algae, cloudy water, and wasted chemicals. The usual reasons are a clogged skimmer basket, dirty filter, or air leaks in the suction line.
Try this first:
Clean out skimmer and pump baskets.
Check for air bubbles in the pump basket lid.
Backwash or clean the filter.
Check all valves for proper alignment.
A dirty filter can reduce water pressure by 40% or more, which makes it hard for your pool to stay clean. If these steps don’t fix the issue, it might be a pump problem or leak underground. Hydra’s equipment repair service in Frisco and Allen, TX can check and replace damaged parts fast.
Fun fact: Most Texas pools need longer daily pump times than pools in cooler states. Running it at least 8–10 hours daily helps maintain proper circulation.
Problem #5: Broken or Noisy Pool Equipment
If your pool pump or filter suddenly starts sounding like a jet engine, it’s trying to tell you something. Noisy equipment is a red flag. It could mean the motor bearings are worn out, the impeller is clogged, or there’s air getting into the system.
This issue is really common across McKinney, TX and The Colony, TX, especially during summer. High heat and dust shorten equipment life. Research shows Texas pools experience 25% more mechanical failures than pools in cooler regions.
If your equipment is loud or vibrating:
Check for loose bolts or fittings.
Make sure water flow is normal.
Look for leaks or dripping water around the pump.
Shut it off if you smell burning or hear grinding.
Hydra’s pool repairs in Frisco, TX include full pump, heater, and filter repairs. We work with all major brands and offer quick replacements if needed. Our friendly and experienced technicians can also tell you if it’s time to upgrade to energy-efficient systems that save money long-term.
Problem #6: Scaling and Stains on Pool Tiles
If you’ve noticed white crust on your pool tile or gray spots near the waterline, that’s calcium scaling. It’s one of the most annoying issues pool owners face in Plano, TX and Murphy, TX.
Hard water and evaporation are the main culprits. North DFW has higher mineral content in tap water, so the more your pool evaporates, the more calcium gets left behind. Over time, it builds up and looks terrible.
To fix it:
Lower calcium hardness to around 250 ppm.
Use a pumice stone to scrub light deposits.
For thick or widespread scaling, schedule a bead blasting service.
Hydra offers tile cleaning and bead blasting across Frisco, Allen, and McKinney, TX. We use fine glass beads that remove calcium without damaging your tile or plaster.
Fun fact: Areas in North DFW, TX have up to 50% more calcium in water compared to coastal areas, making scaling much more common.
Problem #7: Pool Draining and Refill Mistakes
Sometimes homeowners think the best way to clear up bad water is to drain it. While that can work in certain cases, it can also be risky. Inground pools rely on the weight of the water to stay in place. If you drain them completely, the surrounding soil can push the pool upward, especially after rain.
Draining should only be done when:
TDS (total dissolved solids) levels are over 2,000 ppm.
There’s a major chemical imbalance that can’t be fixed.
The pool has serious staining or algae.
Hydra provides pool draining and refill services in McKinney, TX and Allen, TX, making sure it’s done safely and correctly. We also test water hardness and balance chemicals once it’s refilled.
A good rule: never drain your pool more than halfway unless a professional says it’s safe.
When to Call a Pool Technician
Some problems you can handle on your own, but others are better left to professionals. If you’ve tried cleaning and balancing your water and things still don’t look right, call Hydra.
Our technicians across North DFW, TX know exactly what local water and weather can do to pools. Whether you have green water in Murphy, TX, low pressure in Plano, or pool leaks in Frisco, we can fix it fast.
Hydra also offers customized maintenance plans, so you never have to worry about when to test, clean, or repair again. Regular maintenance not only keeps your water crystal clear but can also extend your equipment life by years.
One of our customers in Frisco, TX had a minor leak that we caught early during an inspection. Fixing it right away saved them over $1,500 in future repairs. That’s why a simple check-up goes a long way.
And for new customers in North DFW, Hydra offers $100 off the first month of service a great way to start your pool care the right way.
Keep Your Texas Pool Running Smooth All Year
Pools in North DFW, TX are meant to be enjoyed, not stressed over. But when problems come up, fixing them early makes all the difference.
From green water and pool leaks to scaling and filter clogs, every issue has a simple solution when handled quickly. Regular cleaning, balanced chemicals, and proper equipment checks keep your pool safe and sparkling through the long Texas season.
If you live in Frisco, TX, Murphy, TX, Allen, TX, Plano, TX, McKinney, TX, or The Colony, TX, you can count on Hydra Pool Services for all your pool repairs, maintenance, inspections, and cleaning needs.
Call today to schedule your free visit and see why so many North DFW homeowners trust Hydra for professional pool care.
